Location to place your wg0.conf

Ziel

/etc/wireguard/

Wert

/mnt/user/appdata/wg-bridge

Ziel

1080

Standard

1080

Wert

1080

Ziel

8080

Standard

8080

Wert

8080

Set you ipv4 LAN network in CIDR format. Only needed if you want to reach something attached to this container and vice versa

Ziel

LAN_NETWORK

Standard

192.168.2.0/24

Wert

192.168.2.0/24

Set your ipv6 LAN network in CIDR format. ULA or GUA. Only needed if you want to reach something attached to this container and vice versa

Ziel

LAN_NETWORK6

Standard

fd00::/64

Wert

fd00::/64

Allows you to change the port Privoxy listens on inside the container. If you change it, dont forget to add a new port mapping

Ziel

HTTPPORT

Standard

8080

Wert

8080

Setting this to 1 will pick a wireguard config file randomly to establish the connection. Do not name the files wg0.conf

Ziel

ENABLE_RANDOM

Standard

0

Wert

0

By default the healthcheck checks its endpoint via ping. This might not be possible in some cases. You can set a domain or ip address here to use instead.

Ziel

HEALTH_URL_CHECK

This variable enables the Connected Containers feature which will notify compatible containers when the VPN is restarted and restart themselves. To enable this feature enter '27286' without quotes, if you don't want to enable this feature leave this field empty.

Setting ANY value will disable the VPN tunnel enforcement. That means the container will not ensure that all your traffic is routed through the VPN. This is useful if you want your containers only to reach specific VPN IPs but otherwise want to use your internet connection

Ziel

DISABLE_TUNNEL_MODE