Target

TEMPEST_DEVICE

Default

True

Enter your Station ID for your WeatherFlow Station. Default value is blank.

Target

STATION_ID

Enter your personal access Token to allow retrieval of data. If you don't have the token login with your account and create the token. NOTE You must own a WeatherFlow station to get this token. Default value is blank

Target

STATION_TOKEN

The IP address of your mqtt server. Even though you have the MQTT Server on the same machine as this Container, don't use 127.0.0.1 as this will resolve to an IP Address inside your container. Use the external IP Address. Default value is 127.0.0.1 (Required)

Target

MQTT_HOST

Default

[IP]

The Port for your mqtt server. Default value is 1883

Target

MQTT_PORT

Default

1883

The username used to connect to the mqtt server. Leave blank to use Anonymous connection. Default value is blank

Target

MQTT_USERNAME

The password used to connect to the mqtt server. Leave blank to use Anonymous connection. Default value is blank

Target

MQTT_PASSWORD

Set this to True if you want to retrieve Forecast Data from WeatherFlow. If set to True, STATION_ID and STATION_TOKEN must be filled also. NOTE If this is enabled the component will access the Internet to get the Forecast data. Default value is False

Target

ADD_FORECAST

Default

False

The interval in minutes, between updates of the Forecast data. Default value is 30 minutes.

Target

FORECAST_INTERVAL

Default

30

Enter imperial or metric. This will determine the unit system used when displaying the values. Default is metric

Target

UNIT_SYSTEM

Default

metric

Set the hight above sea level for where the station is placed. This is used when calculating some of the sensor values. Station elevation plus Device height above ground. The value has to be in meters (meters = feet * 0.3048). Default is 0

Target

ELEVATION

Default

0

Currently these languages are supported for Wind Cardinals and other Text state strings: en: English da: Danish If you would like to assist in translating to a new language, do the following: From the translations directory on this Github Project, download the file en.json Rename the file to YourLanguageCode.json - example for Spanish rename it to es.json Edit the file and translate the strings Make a pull request in Github and attach the file.

Target

LANGUAGE

Default

en

Target

/usr/local/config

Default

/mnt/user/appdata/weatherflow2mqtt

Value

/mnt/user/appdata/weatherflow2mqtt

The weather stations delivers wind speed and bearing every 2 seconds. If you don't want to update the HA sensors so often, you can set a number here (in seconds), for how often they are updated. Default is 0, which means data are updated when received from the station.

Default

0

Value

0

Unless you have a very special IP setup or the Weatherflow hub is on a different network, you should not change this. Default is 0.0.0.0

Default

0.0.0.0

Value

0.0.0.0

Weatherflow always broadcasts on port 50222/udp, so don't change this. Default is 50222

Default

50222

Value

50222

Set this to True, to get some more mqtt debugging messages in the Container log file. Default value is False

Default

False

Value

False

Set this to True to enable more debug data in the Container Log. Default is False

Default

False

Value

False