Ultrafeeder

Ultrafeeder

Docker app from Eurotimmy's Repository

Ultrafeeder is the SDR-Enthusiasts all-in-one ADS-B container: it decodes 1090 MHz aircraft signals from an RTL-SDR dongle with readsb, shows them on a live tar1090 map, graphs…

Requirements

An RTL-SDR (or other readsb-supported) receiver connected to the Unraid server. Only one container can use a given dongle at a time.
Overview

Ultrafeeder is the SDR-Enthusiasts all-in-one ADS-B container: it decodes 1090 MHz aircraft signals from an RTL-SDR dongle with readsb, shows them on a live tar1090 map, graphs your reception with graphs1090, and can feed many aggregators (adsb.fi, airplanes.live, ADSBExchange and others) with MLAT.

It also works as a "receiver" for other feeder containers. For example, the FR24/FlightAware all-in-one containers can take their data from Ultrafeeder's Beast output (port 30005) instead of opening the dongle themselves.

:: QUICK START ::

  1. Plug in your RTL-SDR dongle. Make sure no other container (dump1090, fr24feed-piaware, etc.) is using it.
  2. Set your receiver latitude, longitude and altitude (metres, e.g. 18m).
  3. Start the container and open the WebUI. Aircraft should appear within a minute.

:: POWERING AN LNA (BIAS-TEE) ::
If you use a bias-tee powered LNA/filter with an RTL-SDR Blog V3/V4, set "Enable Bias-Tee" to true AND put --enable-biastee in "Extra readsb Arguments". The second setting makes readsb keep the bias-tee on after it opens the dongle; some decoders reset it, which leaves the LNA unpowered and blocking signal.

:: GAIN ::
"auto" uses readsb's built-in auto-gain (recommended by SDR-Enthusiasts). You can also set a fixed value in dB, e.g. 40.2.

:: FEEDING AGGREGATORS ::
Use ULTRAFEEDER_CONFIG to add feeds, e.g. adsb,feed.adsb.fi,30004,beast_reduce_plus_out;mlat,feed.adsb.fi,31090 and set UUID (generate one with: cat /proc/sys/kernel/random/uuid). See the project README for the full list.

This is a community template. It is not affiliated with SDR-Enthusiasts. Please report template problems via the Support link.

Ultrafeeder (ADS-B) for Unraid

Unraid Community Applications template for sdr-enthusiasts/docker-adsb-ultrafeeder. It's an all-in-one ADS-B container with readsb, a tar1090 map, graphs1090 and multi-feeder/MLAT support.

This is a community template. It is not affiliated with SDR-Enthusiasts. Container questions are best asked on the SDR-Enthusiasts project; template questions go to the support link in the template.

Quick start

  1. Plug your RTL-SDR dongle into the Unraid server. Stop any other container that uses it, such as dump1090 or fr24feed-piaware, because only one container can open a dongle at a time.
  2. Install Ultrafeeder from Community Applications.
  3. Fill in Receiver latitude, Receiver longitude and Receiver altitude (for example 18m).
  4. Start it and open the WebUI (default http://SERVER:8080). Aircraft should appear within a minute. Graphs are at /graphs1090/.

Powering an LNA with the bias-tee

Bias-tee powered LNAs and filters, such as the RTL-SDR Blog ADS-B LNA or a SAWbird, need DC power up the coax from the dongle (RTL-SDR Blog V3/V4).

Set both:

Setting Value
Enable Bias-Tee (READSB_ENABLE_BIASTEE) true
Extra readsb Arguments (READSB_EXTRA_ARGS) --enable-biastee

Why both? Some decoders switch the bias-tee on before starting, then reset it when they open the dongle. Your LNA ends up unpowered, and an unpowered LNA blocks most of the signal. Passing --enable-biastee to readsb makes the decoder itself hold the bias-tee on.

How to tell if your LNA is unpowered: few aircraft, and a noise floor (in /data/stats.json or graphs1090) that barely moves when you change the gain. You can confirm with a multimeter: with the coax disconnected and the container running, expect about 4.5 V DC between the dongle's SMA centre pin and its outer threads.

Using Ultrafeeder as the receiver for other feeders

If you already run an all-in-one feeder such as thomx/fr24feed-piaware for FR24 and FlightAware, let Ultrafeeder own the dongle and point the other container at Ultrafeeder's Beast output.

In fr24feed-piaware set:

SERVICE_ENABLE_BIAST=false
DUMP1090_ADDITIONAL_ARGS=--device-type none
SERVICE_ENABLE_IMPORT_OVER_NETCAT=true
DUMP1090_LOCAL_PORT=30004
DUMP1090_REMOTE_HOST=<your Unraid IP>
DUMP1090_REMOTE_PORT=30005

That container keeps all its feeds (FR24, FlightAware, and the rest) but no longer touches the dongle.

Gain

auto (default) uses readsb's built-in auto-gain, which SDR-Enthusiasts recommend. If you prefer a fixed gain, step it up until you see a small percentage of "strong signals" (above −3 dBFS) during busy traffic, then back off one step.

Feeding aggregators

Add feeds with ULTRAFEEDER_CONFIG and set a UUID. See the project README for the full list. For example:

adsb,feed.adsb.fi,30004,beast_reduce_plus_out;mlat,feed.adsb.fi,31090

Categories

Related apps

Links

Details

Repository
ghcr.io/sdr-enthusiasts/docker-adsb-ultrafeeder:latest
Last Updated2026-11-16
First Seen2026-11-16

Runtime arguments

Web UI
http://[IP]:[PORT:80]/
Network
bridge
Shell
bash
Privileged
false
Extra Params
--device-cgroup-rule='c 189:* rwm' --tmpfs /run:exec,size=256M --tmpfs /tmp:size=128M --tmpfs /var/log:size=32M

Template configuration

WebUI (tar1090 map)Porttcp

tar1090 live map, graphs1090 (/graphs1090/) and stats. Change the host port if 8080 is already in use.

Target
80
Default
8080
Value
8080
Beast outputPorttcp

Beast data output. Point other feeder containers here (host IP:30005), e.g. fr24feed-piaware with SERVICE_ENABLE_IMPORT_OVER_NETCAT.

Target
30005
Default
30005
Value
30005
SBS/BaseStation outputPorttcp

SBS (BaseStation) format output for tools such as Virtual Radar Server.

Target
30003
Default
30003
JSON position outputPorttcp

JSON position output.

Target
30047
Default
30047
Receiver latitudeVariable

Your receiver's latitude in decimal degrees, e.g. -28.0875

Target
READSB_LAT
Receiver longitudeVariable

Your receiver's longitude in decimal degrees, e.g. 153.3922

Target
READSB_LON
Receiver altitudeVariable

Antenna altitude above sea level with unit, e.g. 18m or 60ft

Target
READSB_ALT
Device typeVariable

rtlsdr for RTL-SDR dongles. Other options: modesbeast, gnshulc. Leave empty if this container only receives network data.

Target
READSB_DEVICE_TYPE
Default
rtlsdr
Value
rtlsdr
RTL-SDR serialVariable

Optional. Serial number of the dongle to use. Only needed if you have more than one RTL-SDR.

Target
READSB_RTLSDR_DEVICE
GainVariable

auto = readsb built-in auto-gain (recommended). Or a fixed value in dB such as 40.2. autogain = legacy slow auto-gain script.

Target
READSB_GAIN
Default
auto
Value
auto
PPM correctionVariable

Optional oscillator correction in PPM. Usually not needed for TCXO dongles such as the RTL-SDR Blog V3/V4.

Target
READSB_RTLSDR_PPM
Enable Bias-TeeVariable

true to power a bias-tee LNA/filter through the coax (RTL-SDR Blog V3/V4 and similar). Also add --enable-biastee to Extra readsb Arguments.

Target
READSB_ENABLE_BIASTEE
Default
false
Value
false
Extra readsb ArgumentsVariable

Extra arguments passed to readsb. For a bias-tee powered LNA use: --enable-biastee

Target
READSB_EXTRA_ARGS
Ultrafeeder config (feeds)Variable

Optional semicolon-separated list of feeds/MLAT/inputs. See the project README (ULTRAFEEDER_CONFIG section).

Target
ULTRAFEEDER_CONFIG
Feeder UUIDVariable

Optional. Unique ID sent to aggregators. Generate with: cat /proc/sys/kernel/random/uuid

Target
UUID
MLAT user nameVariable

Optional. Name shown on aggregator MLAT sync maps.

Target
MLAT_USER
Location accuracyVariable

0 = no location, 1 = 2 decimals, 2 = exact, 3 = 1 decimal, 4 = 0 decimals

Target
READSB_RX_LOCATION_ACCURACY
Default
2
Value
2
Collect range statisticsVariable

true to collect range statistics for the graphs1090 polar plot.

Target
READSB_STATS_RANGE
Default
true
Value
true
Update tar1090 at startVariable

true to update tar1090 and its aircraft database at container start.

Target
UPDATE_TAR1090
Default
true
Value
true
Map page titleVariable

Title shown on the tar1090 map page.

Target
TAR1090_PAGETITLE
Default
Ultrafeeder
Value
Ultrafeeder
Log levelVariable

verbose, error or none

Target
LOGLEVEL
Default
error
Value
error
Globe historyPathrw

Persistent tar1090 history and readsb state.

Target
/var/globe_history
Default
/mnt/user/appdata/ultrafeeder/globe_history
Value
/mnt/user/appdata/ultrafeeder/globe_history
Graphs dataPathrw

Persistent graphs1090 data.

Target
/var/lib/collectd
Default
/mnt/user/appdata/ultrafeeder/graphs1090
Value
/mnt/user/appdata/ultrafeeder/graphs1090
USB busPathrw

Gives the container access to the RTL-SDR USB device.

Target
/dev/bus/usb
Default
/dev/bus/usb
Value
/dev/bus/usb
Disk stats (graphs)Pathro

Read-only, used by graphs1090 for system graphs.

Target
/proc/diskstats
Default
/proc/diskstats
Value
/proc/diskstats